INSTALLATION
INSTALLATION
IMPORTANT INFORMATION
We recommend that mounting brackets are secured into stud
work. If unable, prior to installation make sure the wall can
support a load of 12kg.
Prior to installation of shower panel please familarise yourself with the
Height Setup
page for dimensions.
Note:
There are two options for installing the retrofittable Synergii shower panel.
Option 1:
External water connection |
Option 2:
Concealed water connection
Step 1
Attach mounting brackets to the
finished wall. Use a level to be sure that
the bracket is fixed straight.
Ensure correct hardware is used to fix
bracket to wall.
For mounting position, refer to
Height
Setup
page and/or
Concealed water
point
diagram.
Step 2 -
Concealed water connection
Screw flexible hose from back of shower
panel onto wall connection. Do not over
tighten the nut .
Once the connections are made, turn on
mains water to check for leaks.
Step 3
Carefully hang the shower panel onto
the mounting brackets, ensuring that
both top and bottom brackets are
resting in the correct location on the
back of the panel.
Once the panel is in place, run a line of
silicone down each side of the shower
panel to fix it in place.
Step 4
Finally, connect the handshower to
the bottom water outlet on the side of
shower panel.
Do not overtighten the nut.
Silicone
Step 2 -
External water connection
Connect braided hose to the water
inlet hose on the back of the shower
panel. Make sure connection is secure
but do not over tighten the nut.
Connect braided hose to external water
connection.
Once the connections are made, turn
on mains water to check for leaks.