Stream ContentCentre, Инструкция по установке и эксплуатации

Страница: 13 / 37

Installation Requirements
The equipment required to install a Stream Media Server system
34?4=3B>=C748=BC0;;0C8>=B8C40=3BHBC4<2>=L6DA0C8>=
Power
The ContentCentre and ContentPlayer should each be connected to
07867 @D0;8CHBDA64?A>C42C>AF8C7BD5L284=C>DC;4CB(>F4A>DC;4CB
should be earthed and preferably shielded from power surges and
brownouts. A UPS is recommended.
Network
The site network must meet the following minimum requirements:
J High-speed internet connection
J 86018CC74A=4C*F8C27F8C7BD5L284=C?>ACB
J CAT5E or better twisted-pair Ethernet cables with RJ45
connectors
Note: For ease of setup the MAC Address of the ContentCentre
and ContentPlayer are printed on the serial number labels on
the outer cartons and underside of the units.
Ventilation
Whether rack-mounted or standalone, both the ContentCentre and
ContentPlayer must have adequate ventilation. Avoid siting either
unit above other AV Components such as AV Receivers, Set-top
Boxes and Blu-ray players which produce a lot of heat.
Always allow at least 1U clearance above and below the
ContentCentre and ContentPlayer. Both units will get warm as they
operate.
,B42>>;8=650=B0=3E4=C8;0C8>=?;0C4BC>4=BDA4034@D0C408AM>F85
the Stream Media Server system components are installed in a rack.
Stream Media System Installation and User Guide - 9