Streacom FC9, Руководство пользователя

Страница: 12 / 16

P12 - FITTING THE OPTICAL DRIVE
Fitting the Optical Drive
Before fitting the slot loading drive, affix a self
adhesive rubber pad (included in the accessory
bag) to the drives eject button. With left side
eject buttons, 2 pads may be required (one on
top of the other to increase the thickness).
The case is supplied with 2 mounting brackets
which fit to either side of the drive (pay attention
to the orientation as each side is different). Use
the 4 short screws supplied to fix the brackets
to the drive.
Self Adhesive
Rubber Pad
With the brackets fitted to the optical drive, you
can now fix it to the cage using 3 screws as
shown. Do not fully tighten the screws as your
will need to adjust the drive position to work
with the eject button.
M2 x 3.5
M3 x 4