Streacom FC8, Руководство пользователя

Страница: 15 / 16

Replace the Top Panel
With the hardware components installed, the top panel can now be
replaced. Prior to doing this, ensure that all cables are connected and
components are securely fitted. Carefully replace the top panel onto the
case and secure it in place using 4 screws, 2 from under the case and 2
from the side between the heat sink fins.
Connect, Position and Power Up
With the case now fully assembled and closed, all that remains is to connect the power and I/O cables to the appropriate ports.
When positioning your case, please consider an area out of direct sunlight, with adequate natural air flow and a moderate ambient room temperature.
PCS-M3x8
PPH-M3x8
IMPORTANT NOTICE
Passively cooled products can get hot to the touch,
especially when running at high loads for extended periods.
This is a normal part of their operation and they have been
tested to run safely under these conditions, but please take
their operational temperature into consideration when
positioning and handling them.
15