Plain
Rivets
Top Rear
Wall Channel
Bottom Rear
Wall Channel
Top of Shed
Corner
Bracket
Corner
Bracket
Top of Shed
Door Mount Detail
Doorway
Channel
Sliding Door
Mount
Plain
Rivets
Sliding Door
Mount
Top of Shed
Plain Rivets
Doorway
Channel
Door Guide
Ramp Channel
Door Guide
Ramp Channel
Door Guide Detail
Top of Shed
Secure the back centre wall panel in place by attaching the top
and bottom rear wall channels. Fix each channel using six plain
rivets (Figure 6).
Figure 6
Fix the corner brackets to the top and bottom of the back
corners on the shed (Figure 7) using two plain screws per bracket.
Pre-drilled pilot holes have been provided. The use of a square
will help ensure that all corners of the shed are accurate.
Figure 7
Next, place the sliding door mount along the top front of the shed
so that its ends are flush to the edge of the wall ribs (Figure 8).
Attach the sliding door mount using one plain rivet through
each doorway channel and one through each end rib as shown
in Figure 8. Upon fixing the sliding door mount, attach corner
brackets to the front top corners.
Figure 8
Figure 9
Place the door guide ramp channel along the bottom front of the
shed so that its ends are flush to the edge of the wall ribs (Figure 9).
Attach the door guide ramp channel using one plain rivet through
each doorway channel and one through each end rib (Figure 9).
After attaching the channel, fix the corner brackets to the front
bottom corners.