STRATCO EZI-SLAT FENCING INSTALLATION GUIDE
ENGINEERED EZI-SLAT FENCING DESIGN TABLES
DESIGN NOTES
Design fence loading determined in accordance with
ASCE/SEI 7-10: Minimum Design Loads for Buildings and
other structures.
Exposure B: Urban and suburban areas, wooded areas, or
other terrain with numerous, closely spaced obstructions
having the size of single-family dwellings or larger.
Exposure C: Open terrain with scattered obstructions having
heights less than 30 feet.
Topographic Multiplier, Kzt = 1.0 has been used throughout.
Tables suitable for use for fencing with aspect ratio (i.e.
Fence Length over Height) of 2 or more.
Post grade (minimum): Yield: 50750 PSI (350MPa)
Ultimate: 62400 PSI (430MPa)
PANEL DEFINITION
(based on fence aspect ratio up to 10)
:
General panels are those greater than 2x overall panel height
from the end of the panel run or greater than 2x overall
panel height from a return corner.
Free End Panels are those within a distance of 2x overall
panel height from the end of the panel run, not including
panels immediately adjacent a wall or fence.
Return Corner Panels are those within a distance of 1x
overall panel height from a return corner.
Stratco can offer additional engineering advice if design
parameters vary from those stated.
MAINTENANCE REQUIREMENTS
Fencing located greater than 3000 feet from a marine or
severe industrial/corrosive environments require normal
inspection and maintenance, refer to the ‘Selection, Use &
Maintenance of Stratco Steel Products’ brochure. For fencing
which is located closer than 3000 feet from these
environments, increased inspection and maintenance is
required, refer to the ‘Stratco Product Maintenance - Severe
Environment Considerations’ brochure.
MAXIMUM ALLOWABLE POST SPACING, feet (mm) - 2.55 x 2.55 x 0.1in SHS (65x65x2.5mm)
EXPOSURE
BASIC
WIND (mph)
GENERAL PANELS
0-1h FROM FREE END
1h-2h FROM FREE END /
RETURN CORNER PANELS
FENCE HEIGHT, feet (mm)
FENCE HEIGHT, feet (mm)
FENCE HEIGHT, feet (mm)
4.0 (1200)
4.9 (1500)
5.9 (1800)
4.0 (1200)
4.9 (1500)
5.9 (1800)
4.0 (1200)
4.9 (1500)
5.9 (1800)
B
100
7.9 (2400)
7.9 (2400)
7.9 (2400)
7.9 (2400)
5.9 (1800)
4.0 (1200)
7.9 (2400)
7.9 (2400)
5.9 (1800)
105
7.9 (2400)
7.9 (2400)
7.9 (2400)
7.9 (2400)
5.9 (1800)
4.0 (1200)
7.9 (2400)
7.9 (2400)
5.9 (1800)
110
7.9 (2400)
7.9 (2400)
7.9 (2400)
7.9 (2400)
4.9 (1500)
4.0 (1200)
7.9 (2400)
6.9 (2100)
4.9 (1500)
120
7.9 (2400)
7.9 (2400)
5.9 (1800)
6.9 (2100)
4.0 (1200)
3.0 (900)
7.9 (2400)
5.9 (1800)
4.0 (1200)
130
7.9 (2400)
7.9 (2400)
5.9 (1800)
5.9 (1800)
4.0 (1200)
2.0 (600)
7.9 (2400)
4.9 (1500)
3.0 (900)
140
7.9 (2400)
6.9 (2100)
4.9 (1500)
4.9 (1500)
3.0 (900)
2.0 (600)
6.9 (2100)
4.0 (1200)
3.0 (900)
150
7.9 (2400)
5.9 (1800)
4.0 (1200)
4.0 (1200)
3.0 (900)
2.0 (600)
5.9 (1800)
4.0 (1200)
2.0 (600)
C
100
7.9 (2400)
7.9 (2400)
5.9 (1800)
6.9 (2100)
4.0 (1200)
3.0 (900)
7.9 (2400)
5.9 (1800)
4.0 (1200)
105
7.9 (2400)
7.9 (2400)
5.9 (1800)
5.9 (1800)
4.0 (1200)
3.0 (900)
7.9 (2400)
4.9 (1500)
4.0 (1200)
110
7.9 (2400)
7.9 (2400)
4.9 (1500)
5.9 (1800)
4.0 (1200)
2.0 (600)
7.9 (2400)
4.9 (1500)
3.0 (900)
120
7.9 (2400)
5.9 (1800)
4.0 (1200)
4.9 (1500)
3.0 (900)
2.0 (600)
5.9 (1800)
4.0 (1200)
3.0 (900)
130
7.9 (2400)
4.9 (1500)
4.0 (1200)
4.0 (1200)
2.0 (600)
2.0 (600)
4.9 (1500)
3.0 (900)
2.0 (600)
140
6.9 (2100)
4.0 (1200)
3.0 (900)
3.0 (900)
2.0 (600)
1.5 (450)
4.9 (1500)
3.0 (900)
2.0 (600)
150
5.9 (1800)
4.0 (1200)
3.0 (900)
3.0 (900)
2.0 (600)
1.5 (450)
4.0 (1200)
2.0 (600)
1.5 (450)
