Stratasys Origin One Скачать руководство пользователя страница 85

Страница: 85 / 88

Declaration of Conformity

Compliance

Page 78

8 SUPPLEMENTARY INFO

Declaration of Conformity

Declaration of Conformity information is available from your Stratasys representative. Please

contact your local regional office for a copy of this document.

Regulatory and Environmental Information

Compliance

The Origin One printer has been tested and found to comply with the limits for an FCC Class A

digital device. It also conforms to various EU directives, including Machinery Directive 2006/42/

EC, Electromagnetic Compatibility Directive 2014/30/EU, and RoHS Directive 2015/863/EU.
Please refer to the appropriate appendices for the respective formal declarations.

EMC Class A Warning

FCC Statements (U.S.A.)

The U.S. Federal Communications Commission (in 47 cfr1 5.105) has specified that the

following notices be brought to the attention of users of this product.

Warning:

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Содержание Origin One




















































































Результаты поиска

Содержание Origin One

Отзывы:

Stratasys Origin One, Руководство пользователя, Страница: 85 / 88

Результаты поиска

Содержание Origin One

Отзывы: