Stratasys J4100 User Guide
4 Operating and Maintaining the Printer
DOC-26000 Rev. C
4-54
Cleaning the Print-Head Splash Shield
To prevent excess printing material from accumulating around the print heads, a
splash shield is installed on the bottom of the print block. Remove the shield and
clean it once a month, when cleaning the print heads (see "Cleaning the Print
Heads, UV Lamp Glass, Roller and Wiper" on page 4-37).
To remove the print-head splash shield:
1. Run the Cleaning wizard from the
Options
menu.
When the printer moves components to the cleaning position, the following
screen appears.
Figure 4-67 Wizard screen during cleaning tasks
2. Open the printer and place a mirror on the build tray.
3. Put on cleaning gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
