Stratasys J4100 User Guide
4 Operating and Maintaining the Printer
DOC-26000 Rev. C
4-13
Figure 4-11 Printer interface after interrupted printing
7. If, for any reason, the correct number does not appear in the dialog box, enter
the number and click
OK
.
You cannot continue printing the model if:
• The number of the last slice printed does not appear in the printer interface,
even if the server computer displays the confirmation dialog box.
• There was a relatively long interruption in printing, even if the “last slice” and
indicators are correct. This is because the part already printed might slightly
deform or shrink before printing continues, causing a visible difference
between it and the part of the model printed later. The effects of a printing
stoppage depend on the model size and structure, the Model material used,
ambient temperature and the length of the stoppage.
