Stratasys Balco WaterJet, Инструкция по установке и эксплуатации

Страница: 16 / 26

Balco WaterJet Installation
16
7. Attach the rear panel.(see Figure 11 )
8. Attach washers to the bolts, insert the bolts, attach the nuts and tighten.
Figure 11 Attaching the rear panel
Leveling the WaterJet Unit
Attach the metal feet to the stand. The WaterJet unit should be level, with all four feet resting securely on
the floor.
Once the WaterJet is placed on the stand, adjust the WaterJet feet so that the machine tilts slightly
backwards. This ensures that the waste water flows to the water outlet at the back of the cabinet.
Attaching the Foot Pedal and Gloves
To attach the foot pedal and gloves:
1. Prepare—
• gloves (supplied)
• foot pedal (supplied)
• two circular clips (supplied)
2. Plug the foot pedal into the mounted socket at the back of the WaterJet.
3. Fit the gloves onto the round openings on the front of the WaterJet cabinet.
4. Place a circular clip on each glove and tighten to secure the gloves to the WaterJet cabinet.