443581626885
2
Quick Start Guide
ViSion.net din rail
encloSure - Small
WARNINGS AND NOTICES
When using electrical equipment, basic safety precautions should always be followed including the following:
• For indoor, dry locations use only. Do not use outdoors.
• Do not mount near gas or electric heaters.
• Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
• The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition
and void warranty.
• Not for residential use. Do not use this equipment for other than intended use.
©2021 Signify Holding. All rights reserved.
All trademarks are owned by Signify Holding or their respective owners. The
information provided herein is subject to change, without notice. Signify does
not give any representation or warranty as to the accuracy or completeness of
the information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Data subject to change.
CUSTOMER SERVICE
If you have any questions regarding this product,
please contact Customer Service by phone at
+1 214-647-7880 or by email at
entertainment.
.
2
comPonent inStallation
Step 1.
Install as required all wiring into the box.
Step 2.
Install DIN rail components, following the appropriate methods and safety procedures per device.
Step 3.
Re-attach front cover and tighten screws.
enclouSre GroundinG
Where required use threaded stud inside of enclosure and included 10-32 nut to bond the enclosure to earth.
SHOWN WITHOUT COVER
GROUND BOND STUD/NUT LOCATION (GRN)
VERTICAL VOLTAGE BARRIER
REPOSITIONABLE LEFT AND RIGHT
AS REQUIRED
HORIZONTAL VOLTAGE BARRIER
TWO INCLUDED
AS REQUIRED
