Wall
rack User Manual
Réaction des gradateurs en cas d'Abscence du
DMX
For DMX fail, use Up/Down buttons to select either Call Preset 1-8, Last
Hold or Delay Fade out time. Press Right button to enter.
If you selected Call Preset, the DMX state will go to the selected preset
when the DMX input fails. Use Up/Down buttons to select preset 1-8.
Press Right button to enter.
If you selected Last Hold, the last DMX state will be held in the event of a
DMX failure.
If you selected Delay Fade out time, the DMX state will be held for the
selected period of time before fading to zero. Use Up/Down buttons to
select the fade out time of between 0-90 minutes. Press Right button to
enter.
Press OK to confirm changes, press again to save or press Esc to exit
without saving any changes.
User Manual v2.
2 Jan.
200
7
22