Multisport
452
ZI de Bel Air 44850 LE CELLIER FRANCE [email protected] Tél. +33 (0)2 40 25 46 90
IASC24_A - Installation SC24.docx
Page 4
S
T
460
260
F
F
F
F
R
Installation on the wall
Caution: the display units must not be connected to mains before installation has been fully completed.
Mains cables: only use the power cables provided. These cables are equipped with pre-wired plugs; the wiring should not be
modified.
Draw the position of the mounting points (F) onto the wall following the measures of the diagram.
Put plugs for Ø 6 mm screws.
Using a large flat screwdriver, remove the 4 round caps (F) at the front of the display units.
Open the compartment door (R) at the back of the display units.
Cable transmission model or radio-controlled model supplied with the cable kit option: install the control cables and the
wall junction box (see page 5).
Connect the mains cables in the display units - Connectors 100-240VAC (S).
Put the compartment door (R) back into place, making sure the cables are in the passage provided for this purpose.
Close and screw the compartment door (R).
Put the display units into place on the wall and screw in Ø 6 mm screws.
Fit the caps (F) back into place.
Plug each display unit into an appropriate mains (+ earth) outlet (the socket should be as close as possible to the display
unit and must be easily accessible).
S
T
