QUESTIONS? PLEASE CONTACT US
0800 244 266
Page 4
765 Tremaine Avenue, Palmerston North, NZ
Gearbox
Patio Blind
Installation
Reinsert the idler end split pin, to lock the blind
into place.
11
Remove the split pin from the idler end mount.
Remove the idler pin and insert it into the idler
end of the roller tube (see image in step 9).
Mount the roller tube: insert the gearbox end
first, then slot in the idler end.
10
Insert the roller tube inserts into the correct
ends of the roller tube. Check the blind will be
facing the correct way around: the bottom bar
should be covered by a PVC flap on the outside
and exposed on the inside.
9
Stage 2: After Blind Manufacture
