STOVES S7 E450BCMAUTO, Руководство пользователя

Страница: 23 / 28

Installation
23
Place the appliance onto the runners
and fasten it to the projections securely
with the screws supplied (see diagram 2
above).
Fix the power lead with the special clip,
to avoid the lead becoming tangled
when the appliance is pulled out of the
cabinetry. The power lead must be long
enough to allow the appliance to be
extracted far enough from the cabinetry
to fill the coffee bean container.
16
Offer the runner to the interior sides
of the cabinet.
The plastic spacers provided (see dia-
gram 4 below) may be used between
the runner side plates and the cabi-
netry to adjust any difference between
the runner, and the cabinetry.
Fix the runners with the screws pro-
vided; then completely extract the two
runners.
If the coffee maker is installed above
a "warming drawer", use the top of
the latter as a reference for the coffee
maker runners. In this case, there will
be no support surface.
approx. 350mm
1
The appliance must be earthed in
compliance with current legislation.
Electrical connections must be performed
by a qualified electrician who will comply
with the manufacturer's instructions, I.E.E.
regulations and local regulations.
Once installed, the electrical socket must
be accessible.
4
3
2
1