Your Hob
Getting started
Place your pan onto the pansupports above the burner you wish to use.
Push in and turn the control knob for your selected burner, to the full on symbol.
The automatic ignition will then light the burner for you - the automatic ignition
is activated once you push in the control knob.
Once the flame is established, you can adjust the heat to suit your pan size.
To simmer, turn the control knob to the small flame symbol. This will ensure
that the flame is just large enough to gently heat the contents of the pan.
Models with thermocouples:
Ignition as above but:
Hold the control knob in for 15 seconds. do not hold the control knob in for any
longer than 15 seconds. If the burner fails to light in this time, release the con-
trol knob and wait for 1 minute before attempting to re-ignite.
Always make sure that your pans are place correctly on the burners as shown
below:
Note:
You might hear a slight popping noise while using the hob burners, this is
quite normal. However, if anything appears unusual about the appliance i.e. a
change in the flame appearance or the operation of the controls - seek expert
advice before continuing to use.
Содержание Richmond Traditional 1000G
Страница 1: ......