STOVES 720G Скачать руководство пользователя страница 37

Страница: 37 / 43

1. Remove appliance from housing

a. Disconnect the electricity supply.
b. Open the grill door and unscrew the

two screws through the front frame.

Pull forward & out onto a suitable surface.

d. Disconnect the gas supply inlet from

the rear wall.

2. Facia panel

a. Disconnect the electricity supply.
b. Open the grill door and unscrew the

two screws through the front frame.

Pull forward & out onto a suitable surface.

d. Pull off control knobs, & programmer

buttons.

Q721G -

Open grill door & support

the facia while unscrewing its securing
screws from the rear of the frontframe
the panel will now be free.

700G -

Open grill door & support

fascia while removing screws from
underside of control panel - the panel
will now be free.

3. Cooling fan

a. Remove appliance from housing (1).
b. Unscrew top / rear panel securing screws.
c.

Ease the panel backwards to gain
access to the fan. Disconnect the 2
wires from the fan.

d. Support the fan and remove the 4 fix-

ing screws which secure the fan to the
panel.

e. Check thermal cutout switch is reset by

pressing button on top of the switch.

4. Ignition generator

a. Remove appliance from housing (1).
b. Unscrew the top / rear panel securing

screws. Ease the panel backwards,
remove both fan leads & lift panel clear.

Unscrew the 2 screws which secure
the generator to the inner rear panel.

d. Disconnect the leads.
e. Reconnect leads to the new generator.

5. Oven / grill spindle mount

switches

a. Remove appliance from housing (1).
b. Unscrew the top / rear panel securing

screws. Ease the panel backwards, remove
both fan leads & lift panel clear.

Remove the fascia glass panel (2).

d. Disconnect the outlet tubing connections

from the thermostat and the grill tap.

e. Remove the two screws securing the

gas rail support bracket to the front
frame.

Remove the 2 screws securing the gas
rail inlet pipe to the rear panel and lift
the gas rail assembly away from the
appliance.

g. Remove circlip from grill tap spindle to

allow removal of switch.

h. Slide switch off the thermostat spindle.

6. Door frame(s)

a. The oven inner glass panel is not

secured to the frame & can be removed.
Hold the top and bottom edges of the
glass and slide out.

b. Insert 2 screws through the inner holes

in the door hinge arms (to stop the door
from springing up).

With the aid of a small screwdriver,
prise out both inner door glass stops,
near the bottom of each side extrusion.

d. Slide door forwards off the plastic hinge

blocks.

SERVICING INSTRUCTIONS

Содержание 720G












































Результаты поиска

Содержание 720G

Отзывы:

Похожие инструкции для 720G

Бренды по названию

Популярные бренды

STOVES 720G, Инструкция для пользователя, установки и обслуживания

Результаты поиска

Содержание 720G

Отзывы:

Похожие инструкции для 720G

Бренды по названию

Популярные бренды