When you are cooking, keep
children away from the vicinity
of appliance.
This product is designed as a domestic
cooking appliance for the preparation
and cooking of domestic food
products, and should not be used for
any other purpose.
■
Remove all packaging from the
appliance before using for the
first time.
■
Make sure you read and under-
stand the instructions before using
the appliance.
■
Keep electrical leads short so they
do not drape over the appliance
or the edge of the worktop.
■
Keep all flammable materials (such
as curtains and furnishings) away
from the appliance.
■
Parts of the appliance may be hot
during or immediately after use.
Care should be taken to avoid
touching heating elements inside
the oven. Allow sufficient time for
the appliance to cool after switch-
ing off.
■
Do not drape tea towels over
the flue vents or door handles, as
this creates a fire hazard.
■
When opening the appliance
door, take care to avoid skin
contact with any steam which may
escape from the cooking.
■
Never use the appliance for
heating a room.
■
When cooking heavy items - eg;
turkeys - do not pull the oven shelf
out with the item still on the shelf.
■
Do not use aluminium foil to cover
the grill pan, or put items wrapped
in foil under the grill as this creates
a fire hazard. The high reflectivity
can also damage the element.
■
Use oven gloves when removing
hot food / dishes from the oven or
grill. The oven / grill and utensils
will be very hot when in use.
■
Do not use foil on oven shelves or
allow it to block the oven flue, as
this creates a fire hazard, and
prevents heat circulation.
■
If the cooker has a storage
compartment below the oven,
this should only be used to store
oven furniture. Do not store any
flammable materials in this
compartment.
■
All installation, servicing and main-
tenance work should be carried out
by a competent person who will
comply with current Regulations,
Standards and Requirements.
■
As with all gas appliances, it is
recommended that your appliance
is serviced regularly.
■
When you have finished
cooking check that all controls
are in the off position.
4
Be Safe - Not Sorry
Stability bracket
If the cooker is fitted with a flexible
connection, a stability bracket should
be fitted to engage in the back of the
cooker. A stability bracket can be
bought from your local supplier.
A stability bracket can be fitted as
follows:
1. Place the cooker in position and
draw a pencil line level with the
front edge.
2. Mark the centre of the cooker to
give the centre line for the bracket.
3. Remove the cooker and mark off
450mm from the pencil line to
locate the front edge of the lower
bracket.
4. Fix the bracket to the floor.
Measure from floor level to
engagement edge in the back of
the cooker and add 3mm.
5. Assemble the underside of the top
part of the bracket to this height.
Levelling
Place a spirit level on a baking sheet
onto an oven shelf.
The cooker is fitted with levelling feet
and locknuts at the front, and wheels
at the rear.
Adjustment of wheel height can be
made with a screwdriver through the
hexagonal hole in the front plinth.
17
Stability bracket
1
Pencil line
on floor
2
Centre
line
3
450
mm
Front edge for
lower bracket
4
5
Underside of top bracket
slots into engagement
edge in back of cooker.
Rear wall
60
mm
Installation Instructions