Storz DUOLITH SD1 R-SW, Руководство по эксплуатации

Страница: 97 / 142

4-49
17 364 02 0320
Operation
ATTENTION!
Malfunction of the device or its components
• Immediately comply with all status and error messages which appear during
the treatment.
CAUTION!
Over extended periods, the noise of the shocks can be per-
ceived as unpleasant!
• Offer ear protection to the patient.
• Recommendation: The user should also wear ear protection.
Setting parameters
Treatment should always start at a low energy level. This also applies to resuming
treatment after an interruption. The shock wave energy should be increased gradually
during treatment. The low levels are used less for therapy and more for familiarising
the patient.
• Select a low energy level and frequency (see C
hapter
4.5.4 s
eleCting treatMent
paraMeters
).
OR
• Load an indication and administer the treatment according to the
recommendations of the treatment parameters stored in the system
(see
C
hapter
4.5.5 l
Oading indiCatiOns
.)
NOTE
The selection of energy levels is based on the medical opinion of the doctor
administering treatment. The maximum energy level used during treatment
must not cause the patient undue pain under any circumstances.
Coupling the handpiece
R-SW
• Apply a sufficient amount of coupling gel to the patient’s skin in the treatment
area and to the shock transmitter.
• Avoid excessive pressure of the shock transmitter to the patient‘s skin. Excessive
pressure is not needed for the success of the treatment.
V-ACTOR
• Apply a sufficient amount of massage oil to the patient’s skin in the treatment area
and to the V-ACTOR shock transmitter.