Storm Interface AT02-43001, Техническое руководство

Страница: 14 / 28

AudioComm
Using the API
The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is
confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of
Keymat Technology Ltd., Copyright 2018. All rights reserved.
AudioComm Technical Manual - Using the Windows Utility Rev 1.0
www.storm-interface.com Page 14 of 28
Controlling the Keypad from the Host Computer
List of Messages
(Structure of Messages from Host to AudioComm is on the following pages)
ID Name Description
01
Device Status Request Output the firmware version & selected parameters
02 LED Brightness Adjust volume key led brightness.
03 Reserved for future use
04 Reserved for future use
05 Load New code table Load new code table
06 Reserved for future use
07 Keypad Table Select layout code table
08 Reserved
09 Write to default AudioCom writes configuration data from ram to flash
10 Reset to factory default Reset device back to factory default
11 Reserved for future use
12 Load Firmware Sets the AudioCom to detect the device loader for firmware loading
13 Reserved for future use
14 Set Serial number Sets the serial number of device, only used for factory
15 Get jack status Retrieves the status of the Jack