13
12
bydash.com
Using Your Blender
Using Your Blender
BLENDER SETTING GUIDE
ON / OFF & PULSE BUTTON
Ensure that the Dial is in the standby position
(the Position Idicator should be pointed
towards the Power Indicator Light). When
Blender is first plugged in and Pitcher is placed
on the Motor Base, the Power Indicator Light
will begin blinking. To pulse, you can press and
hold the ON / OFF button.
MANUAL SETTINGS
Once the Pitcher is in place and the Power
Indicator Light is blinking, turn the Dial to the
desired blending level. The Motor Base will
automatically turn on. To turn off, either turn
the Dial back to the standby position or press
the ON / OFF button. Make sure to turn the
Dial back to the standby position with the
Position Indicator pointed towards the Power
Indicator Light when you are done blending.
Motor will stop automatically after 10 minutes
to prevent from overheating.
PRESET FUNCTIONS
To use a preset function, turn the Dial to any
of the preset functions to the left of the Power
Indicator Light. To begin blending, press the ON
/ OFF button. The motor will automacally turn
off once the cycle is finished. To end the cycle
early, simply press the ON / OFF button again.
Make sure to turn the Dial to the standby
position with the Position Indicator pointed
towards the Power Indicator Light when you are
done blending.
Soup
This setting is convenient for preparing a wide variety
of soups. The blending time is approximately 8 minutes,
resulting in piping-hot, ready-to-serve soups!
Smoothie
This setting is perfect for making smoothies, shakes, mixed
drinks, juices, and frozen drinks. The blending time is
approximately 50 seconds.
Frozen
This setting is for making frozen treats such as ice cream,
snow cones, Italian ice, and much more. The blending time is
approximately 1 minute
PRESET FUNCTIONS GUIDE
BLENDING TIP:
When blending thick and sticky food, start blending at a low
setting. If the blade is jammed, use the Tamper to stir the food in the pitcher
allowing air to come out. Close the lid tightly and begin to blend again. If the
Blades are still jammed, disconnect the power and stir the blender jar using a
rubber stirrer, pressing the ingredients towards the Blades. Then close the lid
and switch on to continue blending.