45
6. Changing spray pattern
The spray pattern of the universal spray gun can be changed by the following settings:
5
1
Setting broad and/ or round jet
The regulating bolt is used to set the width of the spray jet. By turning to the left (turning out) the spray jet becomes a
broad jet, and by turning to the right (turning in) it becomes a round jet.
2
Controlling the atomisation air
The volume of the atomisation air can be controlled by screwing the adjusting screw in or out.
3
Setting the material flow volume
The material volume can be controlled by screwing the adjusting screw in or out. By turning to the left (turning out) the
material volume is increased, and by turning to the right (turning in) it is decreased.
4
Air connection
5
Fluid Inlet
1
2
3
4
