39
8.11 – PAN TILT ZOOM (PTZ)
Use the PTZ Setup menu to configure settings for a connected PTZ camera (not included).
NOTE
Consult the instruction manual of your PTZ camera for information about your camera, including protocol
and baud rate.
To configure a PTZ camera:
1.
Connect a PTZ camera to the BNC and 485A (TX, +) and 485B (RX, -) ports and power outlet.
2.
Under PROTOCOL, select PELCO-D or PELCO-P for the selected channel.
3.
Click NEXT PAGE to view and configure channels 5-8.
4.
Under BAUD RATE, select 1200, 2400, 4800, or 9600.
5.
Under DATA BIT select 5, 6, 7, or 8.
6.
Under STOP BIT, select 1 or 2.
7.
Under VERIFY, select ODD, EVEN, MARK, SPACE, or NONE.
8.
Under ADDRESS, enter an address from 001-255 using the virtual keyboard. Refer to your PTZ camera`s
instruction manual for further details.
9.
Click APPLY to save changes, then click CLOSE in the confirmation window.
10.
Click EXIT to close the menu.
