13
6.2 – REAR PANEL
Refer to the diagram and table below for information on the DVR’s various connections.
REFERENCE
PHYSICAL CONNECTOR
DESCRIPTION
1
POWER input
DC 12V / 3A
2
RJ45
Connect to a computer network
3
VGA output
Connect to a monitor with VGA (D-Sub) input
4
Video output
Connect to a TV or monitor (BNC)
5
Alarm input
8x I/O alarm input
Alarm output
I/O alarm output
RS485
Connect to PTZ camera
6
Audio input
Connect audio input (phono)
7
Audio output
Connect audio output (phono)
8
Video input
8x numbered video inputs for cameras (BNC)
To connect a camera via BNC:
1.
Align the BNC connector with the notches on the BNC socket and
slide into place.
2.
Rotate the BNC connector clockwise until it locks in place.
To disconnect a camera:
1.
Apply pressure to the BNC connector, then rotate anti-clockwise.
2.
Slide the BNC connector away from the socket.