B--FRAME INSTALLATION
1.
As
Figure 3
shown find 1 piece of Roof Bent Tube (part code 1), 2 pieces of
Incline Tube
(part
code 2) 2 pieces of Shoulder Bent Tube (part code 3) and 2 pieces of Standing Leg Tube (Part No.
4). To connect them by using Bolt M8x70
（
part code 13
）
, which makes one group of peak arch.
Please NOTE the direction of the screw. DO NOT install the bolts on the top of the truss where the
fabric will rest.
Figure 3
2.
Insert two end of the assembled peak arch into one base plate and force the other end of the peak
arch into the opposite base plate, fix them using Bolt M8x70mm
（
part code 13
）
.
