26
Disposal Instructions
Removing SFP Transceiver
FW-1060 SFP appliances have two SFP ports. If necessary, you can
remove the SFP transceiver from the SFP ports.
To remove an SFP transceiver
1.
Connect to the engine command line as described in
Connecting
to the Engine Command Line
(page 24).
2.
Shut down the engine:
•
If the appliance is powered on, press
Enter
, log in as the user
root
with the password you have set for the appliance, and
issue the command
halt.
3.
Unplug all power cords from the system or the wall outlets.
4.
Disconnect the cable from the SFP transceiver.
5.
Pull down the latch on the transceiver.
6.
Pull the SFP transceiver carefully out of the port slot.
If you want to replace the SFP transceiver you have removed, follow the
instructions in
Connecting Cables to SFP Ports
(page 14).
D i s po s a l I n s t r u c t i o n s
Dispose of the appliance separately from household waste at an
appropriate waste disposal facility at the end of its useful service life.
Caution –
Invisible laser radiation is emitted from the end of fiber-
optic cable and from fiber port. Do not stare into the beam and avoid
direct exposure to the beam.
