3
SM0974205 A 09
System manual
Checking Field of view
Remark
Before driving it’s mandatory
for the operator of the vehicle
to check if the legally prescribed field of
view is displayed on the monitor.
Display of the system
Warnings
The system is designed to meet legal requi-
rements and to provide the most accurate
representation of a situation. However, the
operator must be aware that due to system
properties a situation might be represented
differently than expected.
The operator remains at all times responsi-
ble for the safe operation of the vehicle and
the assessment of situations during driving
and manoeuvering.
When the system shows a completely white
screen please powercycle the system to
restore it in working order.
1. UNECE R46 regulation
Uniform provisions concerning the approval of devices for indirect vision and of motor vehicles with regard to the
installation of these devices.
The MirrorEye system is developed as a mirror replacement as mentioned in UNECE R46 regulation. In order to use the
MirrorEye system as a mirror replacement the installation needs to be approved by the authorized body.
Warning:
Without installation- or type approval it’s prohibited
to use the MirrorEye system without mirrors
mounted on the vehicle.
Remark:
When mirrors are replaced by the MirrorEye system;
installation approval according to R46 is required.
For legal requirements see:
https://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/2018/R046r6am4e.pdf
The positioning and placement of the cameras and monitors is essential for a proper use of the system.
Without a correct installation the installation approval is not possible.
Contents
Page
1.
UNECE R46 regulation
3
2.
Introduction
4
2.1.
Surveillance camera
4
3.
System descriptions
5
3.1.
System view Set MirrorEye MP
5
3.2.
System view Set MirrorEye MP RHD + S
6
3.3.
System view Set MirrorEye MP LHD + S
7
3.4.
MirrorEye set Layout
8
3.5.
Camera and monitor mounting positions
8
3.6.
MirrorEye installation
9
3.6.1.
Distance lines
9
3.6.2.
Maintenance instructions
9
4.
Cabin Wire Harness electrical connections
10
5.
Dimensions
11
6.
Drilling template
12
7.
Technical specifications
13
7.1.
Set MirrorEye MP
13
7.2.
Set MirrorEye MP RHD + S
14
7.3.
Set MirrorEye MP LHD + S
15
8.
Potential faillures
16
8.1.
Monitor LED status indicator
17
9.
MirrorEye settings menu
17
9.1.
Menu
18
9.2.
Status menus
19
10.
Maintenance and cleaning
20
11.
Disposal
20
12.
General terms and conditions
20
13.
Revision History
21
