background image

EEI–2801/2802

ARMCHAIR

Customer Service 908-368-1025

www.modwayfurniture.com

Page 1 of 3

Thank you for purchasing the

MODWAY ARMCHIAR!

Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2. Owing to the size and weight of the armchair, we recommend that it is assembled by two adults, on a

carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or instructions until you have checked all the components and

hardware and the furniture is fully assembled.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that have been provided.

6. Please keep all pieces out of reach of small children.

Hardware:

A

Long Bolt 1/4”x35mm

x 8

B

Flat Washer 1/4”

x 8

C

Allen Wrench 1/4”

x 1

Component:

1

Chair Back

x1

2

Chair Seat

x1

3

Left Arm

x1

4

Right Arm

x1

1

4

3

2

Содержание EEI-2801

Страница 1: ...embly time 30 minutes 3 Please do not use any tools other than those provided or recommended in these instructions 4 Please do not throw away any of the packaging or instructions until you have checked all the components and hardware and the furniture is fully assembled 5 Assemble all components loosely until advised to tighten Depending on use it may be necessary to tighten the components from ti...

Страница 2: ...Chair Back 1 through the holes on Left Arm 3 Use Allen Wrench C to tighten Bolts A Do not fully tighten Bolts A at this step STEP 2 Hardware Tool required Place Right Arm 4 to Chair Back 1 as shown Insert 1 piece of Bolt A with 1 piece of Flat Washer B into the holes on Chair Back 1 through the holes on Right Arm 4 Use Allen Wrench C to tighten Bolts A Do not fully tighten Bolts A at this step Har...

Страница 3: ... Back 1 Left Arm 3 and Right Arm 4 as shown STEP 4 Insert 6 pieces of Bolt A with 6 pieces of Flat Washer B into the holes on Left Arm 3 and Right Arm 4 through the holes on Chair Back 1 and Chair Seat 2 Use Allen Wrench C to tighten Bolts A Do not fully tighten Bolts A at this step Hardware Tool required 3 4 1 2 C A B 1 3 4 2 Ax6 Bx6 Cx1 ...

Страница 4: ...ir Put a heavy object or seat one adult on top of the Chair Seat 2 to pressure the chair for leveling Use Allen Wrench C to tighten all Bolts A clockwise until secure 1 4 3 2 C Assembly is complete Your armchair is ready to be used now If you want a seat cushion for the armchair you can purchase it from our store Hardware Tool required Cx1 ...

Отзывы: