9
SM0974205 A 09
System manual
3.6. MirrorEye installation
3.6.1. Distance lines.
The distance lines are not visible by default but can be pro-
grammed and set according to rules, see instruction manual
UM0972206. This setting can only be done by your dealer. Dis-
tance lines can be progammed on both the driver-side monitor and
the passenger-side monitor. See Figure 6.
These distance lines are designed to be able to determine the
distance from other traffic on the road and to help the operator
change lanes safely.
There are 3 programmable distance lines (A, B and C).
The settings remain stored after power down. It is the responsibil-
ity of the dealer to make sure that they have a process in place to
make sure that the distance lines are calibrated properly accord-
ing to the description above and that this process is repeatable.
Stoneridge-Orlaco is not responsible for any errors in the calibra-
tion of the distance lines.
The distance lines must be assessed during vehicle installation
approval.
3.6.2. Maintenance instructions
Stoneridge-Orlaco advises the operator and/or owner of the vehicle
to regularly check the calibration of the distance lines. Besides this
Stoneridge-Orlaco strongly advises to check the calibration when
the vehicle is at a service station for servicing
Advise:
We strongly advise to contact your Stoneridge
-
Orlaco dealer for
detailed instructions regarding the installation.
Figure 6
Driver
Ocular
Points
Distance lines
A
B
C
Monitor with
distance lines
displayed
A
B
C
