Stone Mud Buggy FB1000, Руководство оператора

Страница: 35 / 60

35
MUD BUGGY
operation
MACHINE OPERATION
1. Start engine as described under section Starting The Machine.
2. Adjust throttle lever to obtain desired RPM (figure 2).
3. Release parking brake lever to off position (figure 4).
4. Two controls are located on the handle bar (see figure 3). The control on the
operator’s left-hand side is for reverse and the control on the right-hand side is
for forward motion. Select the control for the corresponding motion you want to
go.
5. Squeeze speed control handle (figure 3) on handle bar to move the machine.
Note: The more you squeeze the handle the faster the machine will travel.
6. When you release the speed control handle the machine will stop (if machine does
not stop when speed control is released, have machine inspected by Certified
Repair Person).
7. Service Brake Pedal (see figure 3). Brakes are adjusted at factory and will need to
be adjusted as brake shoes wear. Check operation daily. Adjust at 25 hours then
as needed. Refer to Service Manual.