- 14 -
Lubrication
Mixer is shipped completely assembled and ready for
operation except for installation of the safety chain.
Safety Chain Installation
- Remove the safety chain
kit from the engine compartment. The kit includes a
safety chain and (2) connecting links. Pull one end of
the chain through the (2) key hole slots located in the
front post of the mixer with a hook (see drawing
below and decal on mixer front post). Attach the
connecting links to each end of the chain. Follow the
instructions in the TOWING section of this manual
and on the mixer front post to attach the safety chain
to the towing vehicle.
Installing Chain to Mixer
Engine Oil
- Check the oil level before starting
the engine.
Warranty is VOID if run without
oil.
Consult the
Engine Manual
supplied with
this unit for specific instructions and oil
recommendations.
Hydraulic Oil -
Check oil sight gauge located
on the side of the oil tank/main beam under the
engine compartment. Consult
Service Manual
supplied with this unit for specific instructions
and oil recommendations.
Fuel
- Fill the gas tank with clean gasoline
from a safety can. Consult the
Engine Manual
supplied with this unit for the proper type of
gasoline required.
DO NOT
mix oil with gasoline.
Hardware
- Check all hardware on mixer and
engine/motor before starting. Consult the
Torque Chart section of this manual and tighten
any loose hardware accordingly.
Follow the guidelines found in the SAFETY
PRECAUTION section of this manual
whenever handling gasoline.
Before Starting
Содержание HM1290
Страница 2: ......
Страница 8: ...8 Technical Data Operator Controls...
Страница 9: ...9 Technical Data Decal Identification...
Страница 18: ......