© The Stone Bake Oven Company 2013. All rights reserved.
© The Stone Bake Oven Company 2013. All rights reserved.
1. About your Vento 100 Oven
Congratulations, you are now the owner of your own
registered design Vento 100 Oven, by the Stone Bake
Oven Company.
Your Vento 100 Oven:
• Has Micro-Mesh reinforcement
• Is hand cast in the UK
• Has been kiln dried before dispatch - no curing fires are required
!
Before using the oven, follow all the Vento Manual installation steps,
check that there are no obvious defects in the oven and that the safety
information has been read and understood by anyone using the oven.
Failure to do so may void the oven warranty.
TOP TIP:
To get the very most from your oven, be sure to check out the
online cooking techniques guide and our free recipes at
www.thestonebakeovencompany.co.uk
1.1 Vento Oven finish
Due to the nature of the materials used to make your oven and the hand
casting process, natural variations between ovens is expected. From
variations in colour, minor pitting in the oven surface to surface chipping.
Here at the Stone Bake Oven Company, we believe each oven is unique,
adding to its rustic and individual charm.
1.2 Soot
After the first use, your oven may become blackened in parts. This is due to
soot accumulation and is a normal expectation of any wood fired oven.
1.3 If your Vento Oven chips/ cracks
Take care when maneuvering your Vento Oven, as slight chipping may
occur. If chipping does occur, simply ask the Stone Bake Team for a patch
kit.
Due to the expansion and contraction of the oven during operation, the
appearance of hairline cracks, visible during and after operation is
expected. This is a normal expectation of any wood fired oven. This WILL
NOT effect the longevity and effectiveness of your Stone Bake Oven.
1.4 Vento Oven reinforcement fibres
On very rare occasions, there is potential for fine metal fibres to protrude from
the oven base or dome. Please take care and consideration when
maneuvering the oven. These fibres can simply be removed or trimmed.
1.5 Vento Oven maintenance
Great! A self-cleaning oven! The Vento 100 boasts very little cleaning and
maintenance. All spilled or stuck on food will be burnt off by the heat achieved
within the oven. Simply remove the ashes before the next firing in a safe way
(see section 3.5).
!
Ensure you regularly clean your Vento Oven flue, failure to do so may result
in a flue fire.
2. Vento 100 Oven Assembly
2.1 Vento Oven and Flue clearances
!
Oven clearances are recommended for your safety and the safety of
your property. It is essential that these clearances are maintained from any
combustible materials, failure to do so may result in fire.
If the Vento 100 is installed to meet The Stone Bake Oven Company
specifications, oven clearances are to 100mm from all walls of the oven and
900mm from the flue length. Ensure nothing obstructs the flue from directly
above.
2.2 Vento Oven Delivery
The oven weighs approx 380 kg in total; 3x approx 50kg base pieces and 2
x approx 115 kg dome pieces. Take care when assembling with at least 2-3
strong adults who are trained in lifting techniques.
Included in the Vento 100 package: The Vento 100 Oven, Vento Oven Door,
Flue Length, Rain Cap, High Heat Refractory Insulating Blanket, Calcium
Silicate Insulating Board and High Heat Fire Cement.
