Stoll CMS ADF-3, Руководство по эксплуатации

Страница: 113 / 444

113
4
Adjusting knitting machine
4.1 Basic settings
Kb Correction value for the yarn carrier (on
the right) if the autarkic yarn carrier is
positioned in its own color field. Minimum value: -120

Maximum value: 120

Step width:

0.5=1/32 inch=0.8 mm
K<I>a Correction value for yarn carrier (on the
left) if the autarkic yarn carrier is
positioned outside its own color field. Minimum value: -120

Maximum value: 120

Step width:

0.5=1/32 inch=0.8 mm
K<I>b Correction value for yarn carrier (on the
right) if the autarkic yarn carrier is
positioned outside its own color field. Minimum value: -120

Maximum value: 120

Step width:

0.5=1/32 inch=0.8 mm

mm] Correction of insertion position for
autarkic yarn carriers (ADF)

Positive value: following yarn carrier

Negative value: leading yarn carrier
Minimum value: -100

Maximum value: 100

Step width: 0,1 mm

mm] Correction of the insertion angle for
autarkic yarn carriers (ADF)

Positive value: Steeper yarn angle

Negative value: Flatter yarn angle
Minimum value: -2.5

Maximum value: 5.0

Step width: 0,1 mm
MSEC Carriage speed if this yarn carrier is used
(technical fabrics).
V Reduce carriage speed (n) for yarn
carrier (n = 0..3). The speed is reduced to
75% from carriage reversal point until
achievement of the operating range of
the yarn carrier. Finally it can be chosen
between the following possibilities:

1 = Acceleration up to 100%

2 = Braking down to 50%, maintain
speed over a fabric width of 2 inches,
acceleration up to 100%

3 = Braking down to 50%, maintain
speed over a fabric width of 5 inches,
acceleration up to 100%

0 = Cancelling out of carriage speed
specific to yarn carrier
Comment Comment ASCII Characters
Explanation Value range