46
7
Assembly and setting up
Assembling machine
8. Swivel the cover of the control unit outwards. In the case of the CMS 502,
remove the cover.
9. Remove the transport flap (4).
In the case of the CMS 502, the steps 10 to 13 are not
necessary.
10. Remove the safety nut (6). It does not move easily since the safety nut is
self-locking.
11. Unscrew the distance bolt (7).
12. Screw the screw (5) into the holder until it protrudes on the back side of
the holder and the safety nut can completely be screwed-on.
13. Hook-in the control unit cover in the rear position.
14. Close the cover. Ensure that the cover engages in the screws (5).
15. Tighten the screws (5); this way the cover is secured.
16. Repeat the steps 7 to 15 on the other machine side.
17. Remove all transport locks.
