background image

Page 3

Due to continuous product research and development,

the information contained herein is subject to change without notice.

www.stoddart.com.au

www.stoddart.co.nz

Introduction

Thank you for choosing this quality Culinaire product�
All Culinaire products are designed and manufactured to meet the needs of food service professionals�  By caring for and maintaining your 
new Culinaire product in accordance with these instructions, will provide many years of reliable service�

Stoddart is a wholly Australian owned company, which manufactures and/or distributes a comprehensive range of food service equipment for
kitchens, food preparation and presentation�  Stoddart products are manufactured and/or engineered in Australia to provide excellent results 
whilst offering value-for-money, ease-of-use and reliability�

Carefully read this instruction booklet, as it contains important advice for safe installation, operation and maintenance� 

Keep this booklet on hand in a safe place for future reference by other operators or users�

Stoddart design, manufacture & distribute Food Service Equipment (appliances) exclusively for the commercial market.

This appliance is not designed nor intended for household or domestic use and must not be used for this purpose.

This product is intended for commercial use, and in line with Australian electrical safety standards the following warnings are provided:

•  This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of 

experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person 
responsible for their safety� Children should be supervised to ensure that they do not play with the product

•  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid 

a hazard

The manufacturer and distributor cannot be held responsible or liable for any injuries or damages of any kind that occur 

to persons, units or others, due to abuse and misuse of this unit in regards to installation, removal, operation, servicing or 

maintenance, or lack of conformity with the instructions indicated in this documentation�

Disclaimer

All units made by the manufacturer are delivered assembled, where possible, and ready to install� Any installation, removal, 
servicing, maintenance and access or removal of any parts, panels or safety barriers that is not permitted, does not comply 

in accordance to this documentation, or not performed by a 

TRAINED AND AUTHORISED SPECIALIST

 will result in the

IMMEDIATE LOSS OF THE WARRANTY.

The manufacturer cannot be held responsible or liable for any unauthorised modifi cations or repairs� All modifi cations or 

repairs must be approved by the manufacturer in writing before initiating� All modifi cations or repairs performed to this unit 

must be performed at all times by a 

TRAINED AND AUTHORISED SPECIALIST.

Your New Culinaire Product

To register your new product, Follow the below Link/QR code�

www�stoddart�com�au/warranty-information

All Stoddart manufactured and distributed products are covered by Stoddart’s standard Australia and New Zealand Product Warranty (minimum 
12 month on-site parts and labour, terms and conditions apply)� Further to this standard warranty, certain products have access to an extended 
warranty� Full terms, conditions and exclusions can be found using the below Link/QR code�

Warranty & Registration

Содержание Culinaire CEH.KOR.11.1

















Отзывы: