Page 12
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
Cleaning and Maintenance
• Remove baffle filter by lifting it up and out
• Loosen thumb screws from the filters, lift the filters up and out to remove for cleaning
• The baffle filters can be cleaned in a kitchen sink with warm soapy water or placed in a dishwasher
• Thoroughly wipe dry after cleaning, do NOT allow to air dry
• Reinstall the filters in the following order:
1� Activated Carbon
2� Pleated 50mm F7
3� Pleated 25mm G4
4� Baffle Filter
Filters/Baffle Removal and Installation
Materials Required
• Stainless Cleaner
• Non Abrasive Cleaning pad
• Clean Sanitised Cloth
• Paper Towel
• Container of warm water
• Appropriate PPE (Personal Protective Equipment)
Cleaning Schedule
• Daily cleaning is required for the unit� This will help to maintain and prolong the efficiency of your unit
• The unit should be cleaned at the end of each work day
External Surfaces
Filter Replacement Program
1� Isolate from the power supply
2� Wearing Personal Protective Equipment (PPE), apply Stainless Cleaner with the Cleaner pad to the external surfaces
3� Scrub any baked on soil with the cleaner pad in the same direction as grained polish
4� Wipe clean using a cloth dampened with clean warm water until all Stainless Cleaner and soil has been removed
5� Using a clean sanitised cloth, thoroughly wipe the stainless steel and metal parts dry� Do NOT let water pool on the unit� Check crevices
and folds
Filter
Part No.
Wash/Replace
Replacement Frequency
(Light use when used
with misting filter)
Replacement Frequency
(Heavy use when used
with misting filter)
Baffle Filter
N/A
Wash Daily
N/A
N/A
Pleated 25mm G4
CMFIL�0061
Replace
Quarterly
1 Month
Pleated 50mm F7
CMFIL�0060
Replace
Bi-annual
2 Month
Activated Carbon 25mm
CMFIL�0059
Replace
Annual
Quarterly
