Stocks AG FAN JET PRO PLUS i-CON 130, Оригинальное руководство пользователя

Страница: 9 / 25

9
9 Maintenance
WARNING Always ensure the power supply is disconnected before any maintenance work or
cleaning of this machine by unplugging the power cable or removing the 40amp fuse in the power
cable.
Ensure the parent machine is stationary and parked on level ground before working on the
machine
The machine must be checked regularly by the operator for any damage loose bolts or electrical
connections, vibrations, unusual sounds, and to ensure they function correctly.
WARNING Protective clothing must be worn when applying or handling toxic products
(See page 6 )
Always observe all guidelines provided by the product manufacturer with regards to handling
storage and disposal of products. Take care not to spill any product that could contaminate the
machine or the environment ensuring any product removed from the machine is put back into its
original container.
Before use
1 . Ensure the machine is securely mounted
2 . Check the power supply and ensure the power cable is connected direct to the vehicle battery
3. Check the feed block assembly’s to ensure the feed rollers are clean and replace any worn feed rollers
4. Check the feed rollers rotate freely before starting work
Daily checks
1. Check the disc to motor shaft socket screws on the lower side of the spinning disc to ensure they are tight
and the spinning disc turns with the motor
2 . Check the stainless disc for any wear or distortion and replace prior to use if necessary.
Replacement vane kits available; Part number FJ009A
3. Check the feed block assembly’s to ensure the feed rollers rotate freely
After each use
1. Empty hopper before removing the feed block assembly and clean the machine thoroughly ensuring all
pellets residue has been cleaned from the hopper feed rollers and body of the machine.
2. Disconnect the power supply
3. Replace the PVC waterproof cover (if applicable)
4. Store in dry conditions to protect the machine and control system from moisture
WARNING
DO NOT JET WASH THIS MACHINE