Stocks AG FAN JET PRO PLUS i-CON 130, Оригинальное руководство пользователя

Страница: 19 / 25

19
21 Calibration Hopper
Fitting Instructions
1. With an empty hopper, remove the feed block assembly
from one of the Fan Jets.
2. Slide the Calibration Hopper into the Fan Jet in place of
the feed block with the hopper uppermost, ensure the drive
shaft aligns and secure with the supplied screw knobs.
4. Secure with the two small blacks PVC knobs supplied.
3. Insert the (removed) feed block into the Calibration
Hopper, ensure the drive shaft aligns by slowly rotating the
feed shaft
5. Place a suitable container under the Calibration Hopper to collect pellets whilst calibrating
NOT supplied with the machine
Available through your local Stocks AG dealer
Part No. FJ-005-CAL-DUO