K-FORCE® FULL BAR SERIES
SpeedTech Lights, Inc © 2018
6
Programming Flash Patterns
•
All STL LED products are equipped with a non-volatile memory which will recall the last flash pattern when the Light Bar is turned on.
•
Set your flash pattern by pushing the Flash Pattern button on your Supreme Control® Box to cycle through the various patterns until you
find the appropriate pattern.
•
If you are not using the Supreme Control® Box you will follow the wiring diagram to identify the Flash Pattern wire to manually run through
and select the desired flash pattern.
Take Downs
•
The K-Force series 36” and up will feature two (2) Take Downs in 3 Watt LEDs which have three functions: steady burn, pulsing flash, or flashing
in sequence with the Light Bar’s warning pattern when warning mode is activated.
•
Both Take Down lights will come on simultaneously.
•
If you have Super Take Down model, Super Take Down button will make all forward facing LEDs operate just like the two standard Take Downs.
•
If you are not using the STL Supreme Control® Box you will follow the wiring diagram to identify the Take Down wires to manually program.
When not using the Supreme Control® Box, to12VDC to the Take Down cable will cycle through the Take Down flashing sequence.
Alleys
•
The K-Force series 36” and up will feature two (2) Alleys in 3 Watt LEDs which have three functions; steady burn, pulsing flash, or flashing in
sequence with the Light Bar’s warning pattern when warning mode is activated.
•
Both Alley lights will come on simultaneously.
•
If you are not using the STL Supreme Control® Box you will follow the wiring diagram to identify the Alley wires to manually program. When
not using the Supreme Control® Box, to12VDC to the Alley cable will cycle through the Alley flashing sequence.
Cruise
•
The K-Force series 36” and up will feature four (4) Cruise LEDs in 3 Watt LEDs which have three functions; steady burn, pulsing flash, or flashing
in sequence with the Light Bar’s warning pattern when warning mode is activated.
•
All Cruise LEDs will come on simultaneously.
•
If you are not using the STL Supreme Control® Box you will follow the wiring diagram to identify the Cruise wires to manually program. When
not using the Supreme Control® Box, to12VDC to the Cruise cable will cycle through the Cruise flashing sequence.
Traffic Advisor
•
The K-Force series in 36” and up will feature six (6) LED’s in Amber to the back and will flash within sequence with the Light Bar’s warning pat-
tern until the Left, Right or Center Out button is pushed on the Supreme Control® Box. This allows for full 360 Degree Warning when the slide
switch is in the 3rd position when the traffic advisor is not in use.
•
Multi-Color Units will feature a Traffic Advisor which will flash in color with the rest of the Light Bar and will turn to AMBER once a directional
function is applied.
•
If you are not using the STL Supreme Control® Box you will follow the wiring diagram to identify the Traffic Advisor wires to manually program.
Maintenance
While STL’s Light Bars are very durable, there are some things you need to keep in mind and practice to preserve the longevity and function of
your bar.
•
Never take any STL Light Bars through a car wash, such as a pressure washer, automatic car wash, brushes that will scratch your equipment
or similar car washes or equipment where chemicals, high pressure water, and materials may scratch or damage your equipment.
•
Use Water (H2O) with a soft cloth to clean your Light Bar and lenses.
•
Yellowing of clear lenses may occur overtime. Lenses can be purchased by calling STL Customer Service at 800-757-2581.
All rights reserved. No part of this Operations Manual and Instructions may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to photocopying, recording,
electronic delivery, .pdf reproduction, or any other means of reproducing all or any part hereof without the express prior written consent of the SpeedTech Lights, Inc., except for non-commercial purposes as permitted
by United States copyright law. Customers of SpeedTech Lights, Inc., may download and print this Operations Manual and Instructions for use with products sold to the customer by SpeedTech Lights, Inc. However, no
part of the Operations Manual and Instructions may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred, in any form or by any means, except with the prior written consent
of SpeedTech Lights, Inc.
