STK Professional Audio VX series Скачать руководство пользователя страница 16

Страница: 16 / 32

Panel Descriptions

각 부의 명칭

37. Headphone Output Level

Sets the output level to the headphone output jack.

38. 2TR Input Control

This control adjust the level of the 2TR input signal fed
to main L and R buses.

39. Mono Output Level

Provides a continuously variable control over the signal to
the mono output jack with the master fader unity, the normal
output level range is +0dBu to +4dBu.

40. Aux Return Controls

Provides continuously variable control over the amount of
effect signal(like a reverb or delay and..) from the Aux return
jacks to the left and right master outputs, or alternatively to
the aux1/monitor output, if either Aux-to-Monitor switch (41)
is pressed.

41. Aux Return to Aux1/Mon Switch

This switch used to routed the Aux return signal to the Aux1/
Mon send output.this allows you to use an external effects
device, like reverb or delay,exclusively for the monitors.
when the this switch pressed,the stereo effects return signal
is summed to mono and combined with the signals coming
from all the channel Aux 1/Mon send controls.This switch
are exactly the same as the Aux 1/Mon knobs found in the
channel strip.

42. DSP to Mon Switch

This switch selects route the signal from DSP Effect master
control to the Aux1/monitor output,Typically,this switch is
used to add effects to the stage monitors.

43. DSP Effect Master Control(Digital Signal Processor)

This control adjust the level of the internal digital effect
signal fed to main L and R buses.

44. Phantom Power Indicator

Indicates that the 48V phantom power system is activated
and functional.

45. Power Indicator

Shows that the rear panel the power switch is on(2),and that
adequate AC power is applied.

46.47. Level Meters/Level Set Indicators

The level set indicator lights when PFL Solo mode is active,
indicating that the right meter is displaying whichever signals
are assigned headphone outputs. The meters display the
main L/R output signals, or the solo(PFL and AFL) signals
if activated by any solo switches. When a channel is soloed,
the meters change to reflect the level of that channels signal
level, and the meters indicate before phones knobs giving you
the real facts at all times, even if you are not listening at all.
You may already be an expert at the world of "+4"(+4dBu=
1.23V), "+0"(+0dBu=0.775V) and "-10" (-10 dBu=0.245V)
operating levels. Therefore, now set the solo level to meet
input level of external devices on the mixer output jack. The

FRONT PANEL /

정면부

C. Master Section /

마스터 섹션

2 TRACK

OUT

1=GND

3=COLD(-)

2=HOT(+)

1=GND

3=COLD(-)

2=HOT(+)

UNBAL

Digital Effect Program

01 Reverb Hall 2 5.0 sec
02 Reverb Hall 2 3.0 sec
03 Reverb Room 2.0 sec
04 Reverb Room 1.0 sec
05 Reverb Plate 3.5 sec
06 Reverb Plate 1.5 sec
07 Delay & Reverb 170ms/3 sec.
08 Delay & Reverb 300ms/5 sec.

09 Delay 50% F.B. 100ms
10 Delay 50% F.B. 200ms
11 Delay 50% F.B. 350ms
12 Delay 50% F.B. 500ms
13 Chorus & Reverb slow/4.0 sec.
14 Chorus & Reverb med/2.0 sec.
15 Flanger & Reverb slow/4.0 sec.
16 Flanger & Reverb med/2.0 sec.

UNBAL=

GND

TIP(+)

GND

TIP(+)

RING(-)

BAL=