STK Professional Audio VX series, Руководство пользователя, Страница: 10 / 32

10
4. Panel Descriptions
l
각 부의 명칭
8. Low Cut Switch
75Hz,18dB/oct Low Cut filter cut bass frequencies. We
recommend that you use the Low Cut filter on every
microphone except bass application sound (drum, bass guitar,
recording of thunder-volt) These aside, there is not much
down that you want to hear, and filtering it out makes the low
stuff you want more crisp and tasty. Not only that, but the
Low-Cut filter can help reduce the possibility of feedback in
live situations and it help to conserve amplifier power.
Another way to use the Low Cut filter is in combination with
the LOW EQ on vocals during live performances. Many
times, bass shelving EQ can re-ally benefit voices. Trouble
is, adding LOW EQ also boost stage rumble, mic handling
clunks, and breath pops. Low Cut removes all those problems
so you can add LOW EQ without losing a woofer.
9. Aux1/MON Send
This control knobs tap a portion of each channels signal out
to either an effects processor or for stage monitoring. Adjusts
the amount of channel input signal supplied to the AUX 1/
Monitor out put. AUX1/Monitor send is post EQ, pre fader
feed.
10. Aux2/EFX Send
This control knobs tap a portion of each channels signal out
to either an effects processor or for stage monitoring. Adjusts
the amount of channel input signal supplied to the AUX2
output. and DSP input(internal digital effector). AUX 2/EFX
sends are normally post-fader. therefore any changes made to
the channel controls will effect the EFX send signal.
11. Pan
Sends continuously variable amounts of the post fader signal
to the Left/Sub 1 and Right/Sub 2 Master outputs. In the
center position, equal amounts of input signal are sent to
Left/Sub 1 and Right/Sub 2 Master outputs.
12.13. Main L/R Assign, SUB 1/2 Assign Switch
Alongside each channel fader are two buttons referred to
as channel assignment switches. Used in conjunction with
the channel's PAN knob, they are used to determine the
destination of the channel's signal. With the PAN knob(11) at
the center detent, the left and right sides receive equal signal
levels (MAIN MIX L-R, and SUB 1-2). To feed only one
side or the other, turn the PAN knob accordingly. If you're
doing a mix down to a 2-track, for example, simply engage
the MAIN MIX switch on each channel that you want to
hear, and they'll be sent to the MAIN MIX bus. If you want
to create a subgroup of certain channels, engage the SUB 1-2
switches instead of the MAIN MIX, and they'll be sent to the
appropriate subgroup faders.
Each channel can be assigned or unassigned to subgroups
without affect the main mix outputs or settings within the
channel, and 1-2 subgroup has its own master fader and
FRONT PANEL /
정면부
A. Monaural Input Channel /
모노럴 입력 채널
2 TRACK
IN
2 TRACK
OUT
1=GND
3=COLD(-)
2=HOT(+)
1=GND
3=COLD(-)
2=HOT(+)
UNBAL UNBAL
UNBAL
UNBAL
Digital Effect Program
01 Reverb Hall 2 5.0 sec
02 Reverb Hall 2 3.0 sec
03 Reverb Room 2.0 sec
04 Reverb Room 1.0 sec
05 Reverb Plate 3.5 sec
06 Reverb Plate 1.5 sec
07 Delay & Reverb 170ms/3 sec.
08 Delay & Reverb 300ms/5 sec. 09 Delay 50% F.B. 100ms
10 Delay 50% F.B. 200ms
11 Delay 50% F.B. 350ms
12 Delay 50% F.B. 500ms
13 Chorus & Reverb slow/4.0 sec.
14 Chorus & Reverb med/2.0 sec.
15 Flanger & Reverb slow/4.0 sec.
16 Flanger & Reverb med/2.0 sec.
UNBAL=
GND TIP(+)
GND TIP(+)
RING(-)
BAL=
U
10 0
U
10 0
U
10 0
U
10 0
U
10 0
U
10 0
U
10 0
U
10 0
+10
+7
+4
-4
-10
-20
-30
-40
U
-15
(0dBU)
+10
+7
+4
-4
-10
-20
-30
-40
U
-15
(0dBU)
+10
+7
+4
-4
-10
-20
-30
-40
U
-15
(0dBU)
+10
+7
+4
-4
-10
-20
-30
-40
U
-15
(0dBU)
Solo Mode
+10
+7
-4
-10
-20
-30
-40
-15
(+4dBU)
U
U
(0dBU)
+10
+7
-4
-10
-20
-30
-40
-15
(+4dBU)
U
U
(0dBU)
+10
+7
-4
-10
-20
-30
-40
-15
(+4dBU)
U
U
(0dBU)
+10
+7
-4
-10
-20
-30
-40
-15
(+4dBU)
U
U
(0dBU)
U
-18dBU 0
U
-19dBU 0
★ ★
★
★
13 -14 15 -16
UNBAL=
GND TIP(+)
1=GND
3=COLD(-)
2=HOT(+)
1=GND
3=COLD(-)
2=HOT(+)
U
10 0
U
10 0
U
10 0
U
10 0
+10
+7
+4
-4
-10
-20
-30
-40
U
-15
(0dBU)
+10
+7
+4
-4
-10
-20
-30
-40
U
-15
(0dBU)
-58 -10
-33dB +14dB
-10
U
-20
U
M
ic
G
ain
Lin
e
Tr
im
-58 -10
-33dB +14dB
-10
U
-20
U
M
ic
G
ain
Lin
e
Tr
im
SLEEVE TIP(+)
RING(-)
SLEEVE TIP(+)
RING(-)
1
2
3
4
5
6
7
9
8
10
11
12
13
14
15