STK Professional Audio VM-11S DRV, Руководство пользователя

Страница: 5 / 28

5
Note:
The operation of the VM11T-DRV Triple powered
mixer is nearly identical. This manual will help you
understand and get the most out of all VM mixers.
MONO INPUT CHANNELS
1. Mic In
This input accepts a standard XLR microphone connector and
low impedance microphone.
2. Line In
This input accepts a 1/4inch two conductor plug and is
suitable for unbalanced line level sources.
3. Level
The channel level control provides continuously variable
adjustment of the channel output level to the main mixing
buss
4. EFX(DSP)
The channel EFX(DSP) control varies the amount of channel
signal sent to the D.S.P, as well as to the effects send circuitry
5. MON
This control varies the amount of signal sent to the monitor
send circuitry.
6. High
The high frequency shelf control is set at 8kHz. You can
increase or attenuate frequencies 8kHz(and above)up to 15dB.
There is a detente in the 0 position indicating a flat response.
7. Mid
The mid frequency is centered at 2.5 kHz. You can increase or
attenuate the midrange frequencies by as much 12dB. A
detente is provided in the 0 position indicating a flat response.
8. Low
The low frequency shelf control is set at 80Hz. You can
increase or attenuate frequencies 80Hz(and below) up to 15dB.
A detente is provided in the 0 position indicating a flat
response.
9. PAN
This control varies the amount of channel signal sent to either
the left of right channel of the stereo mixer.
10. PAD
This switch attenuates the input signal by 10dB when
connecting a line level device to channels 1-7, or if the mic
input is distorted turn-this switch on (the pressed-in position)
STEREO INPUT CHANNELS
In addition to the standard seven mono input channels, the
VM11T-DRV features two stereo input channels. Each of
these stereo channels has two 1/4” line level inputs. The
signal from the left 1/4
″ line level input is routed to the left
output and the signal from right 1/4 ″ line level input is routed
the right output. The balance between these two inputs is
controlled by the pan control.
1a. Mic In
This input accepts a standard XLR microphone connector and
low impedance microphone.
2a, 2b. Line In
These channels may be used as monaural inputs by simply
using the "Each L channel" input(8 or 10), in which case the
mono signal you put into the L channel is fed to both odd and
even stereo inputs.
3a. Level
The channel level control provides continuously variable
adjustment of the stereo channel's output level to the main
output.
4a. EFX(DSP)
The channel EFX(DSP) control varies the amount of channel
signal sent to the D.S.P, as well as to the effects send
circuitry.
5a. MON
This controls the amount of signal sent from an individual
channel to both the Mon master control. In addition, this
control also feeds the monitor send. This aux send is a pre
channel level control and pre EQ. This means that the level
sent from an individual input will not be affected by
adjustment of the main channel level control or EQ settings
and allows a completely separate mix for stage monitors.
Ⅳ Panel Descriptions
VM-11TDRV