STK Professional Audio SM-16S DDR PowerPlus, Руководство пользователя

Страница: 22 / 24

22
Inputs
Outputs
Specifications
Input terminals Actual load
Impedance
For use with
nominal
Input level Connector in mixer
Sensitivity Nominal Max. before clip
Mic In 4 ㏀ 50-600 Ω mic -60 dBu
(0.77mV)
-55 dBm
(1.38mV) -25 dBu
(43.7mV) XLR Jack
Line In 10 ㏀ 600 Ω lines -40 dBu
(7.75mV)
-35 dBu
(13.8mV) 0 dBu
(0.77 V) Phone Jack
Stereo In 10 ㏀ 600 Ω lines 0 dBu
(775mV)
0 dBu
(775 mV) +15 dBu
(4.36 V) Phone Jack
Aux Returns 1,2/
ST Sub In (1,2) 10 ㏀ 600 Ω lines -16 dBu
(123mV)
-10 dBu
(245mV) +10 dBu
(2.45 V) Phone Jack
Tape In (L, R) 10 ㏀ 600 Ω lines -16 dBu
(123 mV)
-10 dBu
(245 mV) +15 dBu
(4.36 V) RCA Jack
CH Insert In (5,6,7,8) 10 ㏀ 600 Ω lines +4 dBu
(1.23V)
+4 dBu
(1.23V) +15 dB
(4.36 V) Phone Jack
Amp In (L, R) 10 ㏀ 600 Ω lines +4 dBu
(1.23V)
+4 dBu
(1.23V) +4 dBu
(1.23V) Phone Jack
NOTE: (1) Sensitivity is the lowest level that will produce a full power output, or the nominal
output level when the unit is set to maximum gain.
(2) XLR connectors are balanced. Phone jacks are unbalanced.
Output terminals Actual load
Impedance
For use with
nominal
Input level Connector in mixer
Nominal Max. before clip
Speaker Out
(L, Main / R, Mon) 0.08 Ω 4 Ω SP 750W 600W Speakon *1
8 Ω SP 450W 350W Speakon *1
Main Out (L, R) 150 Ω 600 Ω lines +4dBu (1.23V) +20 dBu (7.75V) Phone Jack
Mono Out
(Sub Woofer) 150 Ω 600 Ω lines +4dBu (1.23V) +20 dBu (7.75V) Phone Jack
Aux Send 1,2 150 Ω 600 Ω lines +4dBu (1.23V) +20 dBu (7.75V) Phone Jack
Monitor Out 150 Ω 600 Ω lines +4dBu (1,23V) +20 dBu (7.75V) Phone Jack
Tape Out (L, R) 600 Ω 600 Ω lines -10dBu (245mV) +20 dBu (7.75V) RCA Jack
Headphone Out (L, R) 200 Ω 40 Ω Phones 180mW+180mW 180mW+180mW Phone Jack
NOTE:(1) All connectors are unbalanced.
(2) In these specifications, when dBu represents a specific voltage, 0 dB is referenced to 0.775 Vrms.