STK Professional Audio SM-16S DDR PowerPlus, Руководство пользователя

Страница: 13 / 24

13
6. Connect the external effects device.
If you are utilizing an external effects device, using
standard 1/4
″ shielded cables, connect the Aux send
jack of your mixer to the input jack of the effects
device and connect the output jack of the effects
device to the Aux Return jack of your mixer.
7. Connect the speakers.
Using heavy gauge unshielded 1/4 ″ speaker cables,
connect your main speaker systems to the parallel
speaker output jacks on the rear panel of your
powered mixer. The total speaker impedance load
of your speaker systems must be 4 ohms or greater.
If you are not certain of your total speaker impedance
load, contact your dealer for assistance.
WARNING: Operating your SM power mixer at an
output impedance less than 4 ohms can damage
your unit and void your warranty!
8. Connect to the Monitor speakers.
Using heavy gauge unshielded 1/4 ″ speaker cables,
connect your monitor speaker systems to the parallel
speaker output jacks on the rear panel of your
powered mixer. The total speaker impedance load
of your speaker systems must be 4 ohms or greater.
If you are not certain of your total speaker impedance
load, contact your dealer for assistance.
WARNING: Operating your SM power mixer at an
output impedance less than 4 ohms can damage
your unit and void your warranty!
Powered Stereo
(SM16S-DDR)
Hookup diagram on page 16
1. Switch everything to OFF.
This includes your SM mixer and all devices to be
connected.
2. Set the AMP Assign Switch to the stereo(out)
position.
3. Connect the input devices into the six or eight
mono input channels.
Group your microphone channels and instrument
channels to make mixing easier.
4. Connect the input devices into the two Stereo
input and sub input channels:
Using standard 1/4 ″ shielded cables, connect the
desired devices into the stereo input channels:
Keyboards, drum machines, tape programs etc.
5. Connect the tape and/or CD player.
If you are feeding a signal from a tape or CD player
into your mixer, using a stereo RCA cable, connect
the output jacks of the player to the tape in jacks of
your mixer. If you wish to record the output of your
mixer, using a stereo RCA cable, connect the tape out
jack of your mixer to the input jacks of the tape recorder.
6. Connect the external effects device.
If you are utilizing an external effects device, using
standard 1/4
″ shielded cables, connect the Aux send
jack of your mixer to the input jack of the effects
device and connect the output jack of the effects
device to the Aux Return jack of your mixer.
7. Connect the speakers.
Using heavy gauge unshielded 1/4 ″ speaker cables,
connect your Left main speaker systems to the two
parallel left/main speaker output jacks on the rear
panel of your powered mixer; Connect your right
main speaker systems to the two parallel right/
monitor speaker output jacks on the rear panel of
your powered mixer.
The total speaker impedance load of your speaker
systems connected to each side of your mixer must
be 4 ohms or greater. If you are not certain of your
total speaker impedance load, contact your dealer for
assistance.
WARNING: Operating your SM powered mixer at an
output impedance less than 4 ohms/side can
damage your unit and void your warranty!
8. Connect the subwoofer system (Optional).
If you are utilizing a separate subwoofer system,
using a standard 1/4" shielded cable, connect the
subwoofer jack to the Input jack of the subwoofer
Amplifier; using a heavy gauge unshielded 1/4"
speaker cable, connect the subwoofer to the
subwoofer Amplifier output jack.
Powered Stereo with Separately
Powered Monitor Speakers
(SM16S-DDR)
Hookup diagram on page 17
9. Connect the External Monitor Equalizer.
If you are utilizing an external graphic equalizer for
the monitors, using a standard 1/4
″ shielded cable,
Connect the monitor Out jack on your mixer to the
Input jack of your external Monitor Equalizer.
10. Connect your External Monitor Power Amp.
If you are utilizing an external Equalizer for the
monitors(No.9) using a standard 1/4
″ shielded cable,
connect the Output jack of your Monitor Equalizer to
the Input jack of your Monitor Power Amp.
If you are NOT using an external Monitor Equalizer,
connect the Monitor Out jack on your mixer directly
to the input jack of your Monitor Power Amplifier.
11. Connect the Monitor speakers.
Using heavy gauge unshielded 1/4 ″ speaker cables,
connect your Monitor Speakers to the Output jacks
of the Monitor Power Amplifier. Make sure that the
total impedance load of your Monitor Speakers is not
less than the recommended minimum impedance that
your Monitor Power Amp can safely handle.
Connecting Your System