27
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-X60IC PRODUCT CODE: 53104 03/2016
Care and Cleaning
Everyday cleaning of the glass surface
Remove fingerprints, marks, stains left by food of non-sugary spill-overs daily
from the glass surface.
1. Switch off the power to the cooktop at the wall.
2. Apply a cooktop cleaner while the glass is still warm, but not hot!
3. Rinse and wipe dry with a clean cloth or paper towel. This is important!
Leaving cleaning residue on the cooktop may stain the glass.
4. Switch the power to the cooktop back on.
NOTE:
• When the power to the cooktop is switched off, there will be no hot surface
indication but the cooking zone may still be hot! Take extreme care.
• Heavy-duty scourers, some nylon scourers and harsh/abrasive cleaning
agents may scratch the glass surface. Take care and check suitability of
your cleaning agents.
Boil-overs, melts, and hot sugary spills on the glass
Remove these immediately with a fish slice, palette knife or razor blade
scraper suitable for induction glass cooktops, but beware of hot cooking
zone surfaces.
1. Switch off the power to the cooktop at the wall.
2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a
cool area of the cooktop.
3. Clean up the soiling or spill with a dishcloth or paper towel.
4. Follow steps 2 to 4 for everyday cleaning of the glass surface, above.
NOTE:
• Remove stains left by melts and sugary food or spill-overs as soon as
possible. If left to cool on the glass, they may be difficult to remove or
even permanently damage the glass surface.
• CAUTION: Cut hazard!
When the safety cover is retracted, a palette
knife or ceramic cooktop scraper is very sharp. Use with extreme care
and always store it safely and out of reach of children. Failure to use
caution could result in injury or cuts.
Other Useful Information
