background image

INSTALLATION INSTRUCTIONS 

30" (76.2 CM) AND 36" (91.4 CM) 

GAS BUILT-IN COOKTOP

INSTRUCTIONS D'INSTALLATION 

DE LA TABLE DE CUISSON À GAZ ENCASTRÉE DE 

30" (76,2 CM) ET 36" (91,4 CM)

Table of Contents/Table des matières

COOKTOP SAFETY........................................................................2

INSTALLATION REQUIREMENTS ................................................3

Tools and Parts ............................................................................3
Location Requirements................................................................3
Electrical Requirements ...............................................................7
Gas Supply Requirements ...........................................................7

INSTALLATION INSTRUCTIONS ..................................................9

Install Cooktop .............................................................................9
Make Gas Connection .................................................................9
Complete Installation .................................................................11

SÉCURITÉ DE LA TABLE DE CUISSON ....................................13

EXIGENCES D'INSTALLATION ...................................................14

Outillage et pièces......................................................................14
Exigences d’emplacement.........................................................14
Spécifications électriques ..........................................................18
Spécifications de l'alimentation en gaz .....................................18

INSTRUCTIONS D’INSTALLATION.............................................20

Installation de la table de cuisson..............................................20
Raccordement au gaz ................................................................20
Achever l’installation ..................................................................22

W10597144A

IMPORTANT:

 

Installer:

 Leave installation instructions with the homeowner.

Homeowner:

 Keep installation instructions for future reference.

IMPORTANT :

Installateur :

 Remettre les instructions d'installation au propriétaire.

Propriétaire :

 Conserver les instructions d'installation pour référence ultérieure.

Содержание W10597144A












Отзывы: