13
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: SORHP1-O PRODUCT CODE: 49165 05/2015
Installation (Cont.)
Positioning the appliance
• Ensure that the aperture that you will be fitting the oven into is of the size
given in Fig. 2, opposite.
• The oven must be fitted into an oven housing with the ventilation cut-outs
shown in Fig. 4 below.
• Ensure that the rear panel of the furniture housing unit has been removed.
Fig. 4: Ventilation and cut-out requirements for the installation of the
appliance into a standard kitchen unit
Fig. 4
Remove rear panel
from this section
75-90mm spacing
between wall and
rear of support shelf
and of cabinet base
False drawer front
to be fitted
Plinth
Minimum cut-out
200cm
2
Support rail to be
removed
