5
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: A007A-07C PRODUCT CODE: 62566 12/2018
General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use
, even if you are familiar with
this type of product. The safety precautions enclosed herein reduce the risk
of fire, electric shock and injury when correctly adhered to. Make sure you
understand all instructions and warnings.
Keep the manual in a safe place
for future reference
, along with the completed warranty information, your
purchase receipt and the original packaging. If you sell or transfer ownership
of this product, pass on these instructions to the new owner.
Always follow
basic safety precautions and accident prevention measures when using
an electrical appliance, including the following:
Electrical safety and cord handling
• Voltage:
Before turning on the air conditioner, ensure the electrical voltage
and circuit frequency correspond to those indicated on the appliance.
• Socket:
Ensure your electrical outlet is properly installed and earthed.
• Moisture:
To reduce the risk of electrocution, never operate the appliance
with wet hands; never submerge it in water or spill liquids into it. Do not use
it in a bathroom or laundry, or where it can be splashed with water.
• Power supply cord:
Do not kink or damage the cord. Do not pull the cord
or place it near a heat source. Always unwind the cord completely to avoid
overheating. Run the cord in such a way so that no one will trip over it.
• Extension cord/adaptor:
Do not use this appliance with an extension cord
or power adaptor.
• Damage:
If the supply cord is damaged, do not use the appliance. A
damaged power supply cord must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
• Power button:
Do not use the mains plug to start and stop the unit; always
use the power button to start and stop the unit.
• On/off switch:
Do not use the mains plug to start and stop the unit; always
use the on/off button on the control panel or remote control to start and
stop the unit.
• Disconnect:
Turn off the unit first and then unplug it when it is not in use
and before maintenance or cleaning, but do not unplug it when it is in
operation, as this could create a spark and cause a fire. Grip by the plug,
do not pull by the cord when disconnecting.
• RCD:
The installation of a residual current device (safety switch) is
recommended to provide additional safety protection when using electrical
appliances. It is advisable that a safety switch with a rated residual
operating current not exceeding 30mA be installed in the electrical circuit
supplying the appliance. See your electrician for professional advice.