19
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: A007A-07C PRODUCT CODE: 62566 12/2018
Cleaning the air filters
This unit has two air intake filters: one at the back of the unit and one at the
side. If the air filters clog up with dust, the airflow volume will be reduced. We
recommend cleaning the filters once every two weeks.
• To remove the filter at the side of air conditioner, grasp the filter by the
protruding handle and gently pull it out from behind the grille.
• To remove the filter at the back, hold it by the handle and pull it out of its
place.
• Wash the filters with a mild detergent in warm water (max. 40°C). Rinse the
filters thoroughly and let them dry completely in the shade.
• Reinstall the dry filters into their designated spaces before reuse.
Other Useful Information
Other Useful Information
Care and cleaning
Electric shock hazard!
Before cleaning and servicing, ensure the unit is switched off and
disconnected from the power outlet to prevent possible injury.
Cleaning the air conditioner
If the housing surface needs cleaning, wipe it with a damp cloth, then dry with
a soft, dry cloth.
Condensation water drainage
Condensation water that forms during cooling will drip into an in-built drain
tray and will be evaporated automatically.
If too much condensation water accumulates that cannot be evaporated
automatically, or if the water pump is damaged, the Water Full (WF) indicator
will illuminate and you will have to drain the water manually via the drain
outlet at the rear of the unit in order for the air conditioner to continue cooling.
See “Before storage”, on page 20, for manual drainage instructions.
CAUTION!
Do not wash the unit directly. Do not use benzene or other solvents or
alcohol-based cleaning agents on any surface. Using harsh cleansers will
scratch or damage the surface, or may lead to deformation of the housing.