10
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: A007A-07C PRODUCT CODE: 62566 12/2018
Before you start
• Unpacking:
This product has been packaged to protect it against
transportation damage. Unpack the appliance and keep the original
packaging materials in a safe place. It will help prevent any damage if the
product needs to be transported in the future, and you can use it to store
the appliance when it is not in use. In the event that the packaging is to be
disposed of, please recycle it where possible.
• Safe packaging disposal:
Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging materials are kept out of
their reach and disposed of safely.
• Inspection:
Unwind the cord fully and inspect it for damage. Do not use if
any part is damaged. In case of damage, contact our after sales support line
for advice.
• Documentation:
Read the manual to familiarise yourself with all parts and
operating principles. Pay particular attention to the safety instructions on the
previous pages.
Installation: the location
When deciding on an installation place, keep the following points in mind:
• The area must be flat and the air outlets must not be covered up.
• There must be a properly earthed AC 220~240V 50Hz power outlet nearby.
• The air exhaust can be installed in a vertical or horizontal sliding window
(Fig. 1, page 11). Window installation instructions follow on pages 12–13.
• There must be a clearance of at least 30cm between the appliance and
the wall or any other obstacles (Fig. 2, page 11). Maintaining this minimum
30cm clearance is essential; failure to keep that distance can result in the
unit malfunctioning or causing injury.
NOTE:
Do not install this appliance at a dry cleaner’s premises.
Electric shock hazard!
Before installation or servicing, ensure the unit is switched off and
disconnected from the power outlet to prevent possible injury.
Installation